|
| |
| Ford Tractors Discussion Forum |
Topic: Ford 4000 Series SOS
[Return to Forum]
| Author |
[Modern View]
|
| Joe F. Young
02-21-2013 16:59:08
76.0.35.80
|
My tractor won't move; in reverse, drive, it's not doing anything. Does it have to do with the SOS transmission?
|
|
|
| Larry NCKS
02-22-2013 09:32:53
70.195.0.108
|
|
Re: Ford 4000 Series SOS in reply to Joe F. Young, 02-21-2013 16:59:08
|
|
| Did this come upon it suddenly, or did it happen gradually?
I'm hearing you say it has neither forward nor reverse drive. Is that so?
|
|
|
| Tequila
02-22-2013 08:36:14
70.196.194.149
|
|
Re: Ford 4000 Series SOS in reply to Joe F. Young, 02-21-2013 16:59:08
|
|
| If your PTO is operating with full torque when applied your problem would appear to be aft of the TLC or input spline. Check that the shift cable is moving correctly,(usually you can feel each shift detent) then with the proper manual proceed with fluid pressure checks and band adjustment. As already posted make sure your traction disconnect is engaged.
|
|
|
| Royse
02-21-2013 21:07:59
69.36.49.151
|
|
Re: Ford 4000 Series SOS in reply to Joe F. Young, 02-21-2013 16:59:08
|
|
| Dean
02-21-2013 18:10:22
152.216.3.5
|
|
Re: Ford 4000 Series SOS in reply to Joe F. Young, 02-21-2013 16:59:08
|
|
| | Is the traction disconnect engaged? Dean
|
|
|
| Joe F. Young
02-21-2013 17:34:12
76.0.35.80
|
|
Re: Ford 4000 Series SOS in reply to Joe F. Young, 02-21-2013 16:59:08
|
|
| yes the PTO working fine. 3 cylinder. once i put it in park it seems that it stays in park no matter wich gear i put it in
|
|
|
| soundguy
02-21-2013 17:59:32
173.103.254.146
|
|
Re: Ford 4000 Series SOS in reply to Joe F. Young, 02-21-2013 17:34:12
|
|
|  got the manual and a set of gauges to check with? this is a chart from John smith's site. it is listed for the earlier prior models SOS.. but I'd at least read thru it. the first section about remaining in park or neutral seems a place to start. there are plenty of SOS guru's here ( not me for sure ).. so they an tell you more. I don't even know if this chart will apply.. but I have a feeling some of it is applicable . good luck
|
|
|
| Joe F. Young
02-21-2013 18:56:12
76.0.35.80
|
|
Re: Ford 4000 Series SOS in reply to soundguy, 02-21-2013 17:59:32
|
|
| Thank you for the info, the chart helped.
|
|
|
| soundguy
02-22-2013 15:02:13
184.233.0.17
|
|
Re: Ford 4000 Series SOS in reply to Joe F. Young, 02-21-2013 18:56:12
|
|
| hope you find out the issue.
|
|
|
| Dean
02-21-2013 17:19:21
152.216.3.5
|
|
Re: Ford 4000 Series SOS in reply to Joe F. Young, 02-21-2013 16:59:08
|
|
| | Does the PTO function properly? Dean
|
|
|
| soundguy
02-21-2013 17:08:30
173.103.254.146
|
|
Re: Ford 4000 Series SOS in reply to Joe F. Young, 02-21-2013 16:59:08
|
|
| | tell us more info. is it a 4 cyl or 3 cyl. if a 4.. is it an updated DDC trans.. or ORC? does it move in all forward ( 10 ) gears? and neither r1/2 works? post back.
|
|
|
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
|
