Author	[Modern View]
soundguy 01-11-2013 19:01:27 107.41.102.121 Report to Moderator	I see you didn't do your research. m2c41 has been superceeded by M2C134 spec oils. IE.. utf. if you have foaming.. check that filter and plumbing. who was president when the PS filter was changed last? if you havn't done it.. it was probably nixon... [Reply]   [No Email]
SuperSam 01-11-2013 19:32:34 184.11.74.212 Report to Moderator	Re: Power Steering fluid/oil for a 3400 Industrial in reply to soundguy, 01-11-2013 19:01:27   I've done research on this and that's why I am using Universal Hydraulic Oil that is 134D compliant. Thanks for the suggestion on the filter change. [Reply]  [No Email]
soundguy 01-12-2013 12:54:38 184.233.184.22 Report to Moderator	Re: Power Steering fluid/oil for a 3400 Industrial in reply to SuperSam, 01-11-2013 19:32:34   give her a good flush and filter and oil change and see what ya get post back [Reply]  [No Email]
SuperSam 01-12-2013 16:03:35 184.11.74.212 Report to Moderator	Re: Power Steering fluid/oil for a 3400 Industrial in reply to soundguy, 01-12-2013 12:54:38   Quoting Removed, click Modern View to see Thanks to all for the great response. I'm going to do exactly that; Drain, flush, and filter. The other problem that I have right now is that it was -16 this morning and my shop is not heated, and I have to drive 100 miles to get the filter. But I'll git-er-done. [Reply]  [No Email]
soundguy 01-12-2013 16:23:27 107.41.135.185 Report to Moderator	Re: Power Steering fluid/oil for a 3400 Industrial in reply to SuperSam, 01-12-2013 16:03:35   look at it this way. this filter will liekyl last the life of the tractor.. :) the last one made it this far. :) [Reply]  [No Email]
SuperSam 01-12-2013 17:31:38 184.11.74.212 Report to Moderator	Re: Power Steering fluid/oil for a 3400 Industrial in reply to soundguy, 01-12-2013 16:23:27   Anybody have a good suggestion on how to flush the system? I'm sure I can get it drained, but not sure how to proceed from there. [Reply]  [No Email]
soundguy 01-12-2013 17:57:26 173.104.43.97 Report to Moderator	Re: Power Steering fluid/oil for a 3400 Industrial in reply to SuperSam, 01-12-2013 17:31:38   cheap oil... it doesn't hold much anyway. I'd add a can of seafoam transtune to that flush oil to grab any free water in the system too. [Reply]  [No Email]
SuperSam 01-12-2013 19:09:16 184.11.74.212 Report to Moderator	Re: Power Steering fluid/oil for a 3400 Industrial in reply to soundguy, 01-12-2013 17:57:26   Seafoam Trans Tune sounds like a great idea. Thanks again for all the information & ideas. [Reply]  [No Email]
soundguy 01-14-2013 06:00:51 173.105.27.209 Report to Moderator	Re: Power Steering fluid/oil for a 3400 Industrial in reply to SuperSam, 01-12-2013 19:09:16   good luck [Reply]  [No Email]