|
| |
| Ford Tractors Discussion Forum |
Topic: Re: 641 steering column bushing
[Show Entire Topic] [Return to Forum]
| Author |
[Modern View]
|
| kentrx1
11-18-2012 16:18:06
98.26.128.209
|
i removed it myself. was not much left of it, but was did have a small ball bearings in it. i posted a picture of it on this side a few days ago as i had to use a cut off tool to cut the band off. how do you get this bushing style in the column?
|
|
[Reply] [No Email] | |
| soundguy
11-19-2012 06:33:36
184.233.108.145
|
|
Re: 641 steering column bushing in reply to kentrx1, 11-18-2012 16:18:06
|
| mic the id and od.. a very slight interference fit will be ok.. VERY slight...
|
[Reply] [No Email] | |
| kentrx1
11-19-2012 07:54:24
72.149.185.59
|
|
Re: 641 steering column bushing in reply to soundguy, 11-19-2012 06:33:36
|
| just discovered there is still an outer hull of the original bearing shell in the column. amazing what a good nights sleep will show you.
|
[Reply] [No Email] | |
| soundguy
11-19-2012 08:39:17
184.233.108.145
|
|
Re: 641 steering column bushing in reply to kentrx1, 11-19-2012 07:54:24
|
| yup.. it drives in and has a lip at the top..
|
[Reply] [No Email] | |
| kentrx1
11-19-2012 10:40:04
72.149.185.59
|
|
Re: 641 steering column bushing in reply to soundguy, 11-19-2012 08:39:17
|
| when i use the new style bushing in the top of the shaft do i still use the spring on top of the solid bushing? do i drive the new bushing level with the column or down further?
|
[Reply] [No Email] | |
| soundguy
11-19-2012 10:54:13
184.233.108.145
|
|
Re: 641 steering column bushing in reply to kentrx1, 11-19-2012 10:40:04
|
| | the spring is virtually useless. old bushing had a ? 1/32 lip that sat on top edge of column.. so you could leave it 1/32 proud.. etc..
|
[Reply] [No Email] | |
| kentrx1
11-19-2012 17:25:23
98.26.128.209
|
|
Re: 641 steering column bushing in reply to soundguy, 11-19-2012 10:54:13
|
| thanks again soundguy! you are such a great resource!
|
[Reply] [No Email] | |
| soundguy
11-20-2012 05:01:00
173.118.158.115
|
|
Re: 641 steering column bushing in reply to kentrx1, 11-19-2012 17:25:23
|
| that area is one of those 'horseshoes' type measurement. ie.. generally.. if close.. it works, as that bushing just centers the top of the steering shaft. as long as the steering wheel can fit down on the splines and put the acorn nut on and it is not binding or rubbing.. should be fine.
|
[Reply] [No Email] | |
[Show Entire Topic]
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
|
