|
| |
| Ford Tractors Discussion Forum |
Topic: 6610 lift jumping
[Return to Forum]
| Author |
[Modern View]
|
| Slade (TN)
08-31-2012 08:15:38
208.118.203.211
|
Ok, 6610 Ford tractor, the 3pt hitch is jumping with no load on it.....lift cyl o-ring and backup ring are new, found a spring on load control valve that was broken, replaced that same response. It acts like a tractor that cylinder packing has worn/ dissolved......it will leak down a bit and bounce right back up to top. Any ideas or suggestions?Slade
615-542-6999
|
|
|
| RBnSC
08-31-2012 16:19:16
76.73.221.117
|
|
Re: 6610 lift jumping in reply to Slade (TN), 08-31-2012 08:15:38
|
|
| My brothers 6610 does the same thing.
Ron
|
|
|
| Doyle (CO-OP)
08-31-2012 11:40:09
75.145.51.166
|
|
Re: 6610 lift jumping in reply to Slade (TN), 08-31-2012 08:15:38
|
|
| Have you checked your draft control setting?
|
|
|
| Bern
08-31-2012 10:59:07
66.218.202.129
|
|
Re: 6610 lift jumping in reply to Slade (TN), 08-31-2012 08:15:38
|
|
| | There was a service bulletin that came out in the late 1980s that had to do with this issue. There was a kit developed to eliminate the drop poppet pin along with the breaking spring issue. Might wish to have the dealer research some old bulletins and see if they can find it. With any luck, the kit will still be available. I don't think a parts guy could locate the kit without the service bulletin.
|
|
|
| RodInNS
08-31-2012 08:57:41
216.118.158.123
|
|
Re: 6610 lift jumping in reply to Slade (TN), 08-31-2012 08:15:38
|
|
| Could be a lot of things on that lift cover... Mal adjusted control valve and a bad lift cylinder safety valve are a couple more options. I think there's also a couple of ball checks in there that could be bad. It's so long since I looked at the flow diagrams for one that I can't remember. A good read through the Ford service manual would be of great benefit...
I'd also not rule out a problem with the lift cylinder itself. I've got one with a nasty gash down the wall and it does leak some...Rod
|
|
|
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
|
