Author	[Modern View]
Greg Wolodkin 07-31-2012 05:13:01 96.252.121.186 Report to Moderator	Needs a little TLC but looks like it's all there. Some repairs to undo/redo. Not happy about the trailer hitch addition mounting holes, and the bottom bracket was clearly modified to fit a larger tractor (PO says 7000, not sure). [Reply]   [No Email]
GT65 08-04-2012 03:58:59 173.85.178.243 Report to Moderator	Re: Snow plow pics in reply to Greg Wolodkin, 07-31-2012 05:13:01   You got a good heavy cutting edge so,although it's not a bulldozer, you can push dirt around with it too! GT65   [Reply]  [No Email]
Brian Allen 08-01-2012 17:27:47 74.198.87.110 Report to Moderator	Re: Snow plow pics in reply to Greg Wolodkin, 07-31-2012 05:13:01   Greg May I suggest the following; remove the filter from the repaired, or new cylinder and install a 90 degree street elbow, then re-install the filter, adjusting so the filter is mounted vertically with the end down. This will help to keep moisture out of the cylinder. Regards Brian   [Reply]  [No Email]
8N'r--WI 08-01-2012 08:59:20 12.104.244.6 Report to Moderator	Re: Snow plow pics in reply to Greg Wolodkin, 07-31-2012 05:13:01   Greg--nice find.....The Spring Trips are an added bonus, too. Tim   [Reply]  [No Email]
Greg Wolodkin 07-31-2012 05:58:29 96.252.121.186 Report to Moderator	Re: Snow plow pics in reply to Royse, 07-31-2012 05:13:01   Does it look like this? If so I think I found a few good pics already and now understand what I probably need. Let me do some more digging, I'll keep you posted. Thanks again Ultradog- Greg   [Reply]  [No Email]
Ultradog MN 07-31-2012 16:22:26 70.56.167.59 Report to Moderator	Re: Snow plow pics in reply to Greg Wolodkin, 07-31-2012 05:58:29   Yep, That's it Greg.   [Reply]  [No Email]
Greg Wolodkin 07-31-2012 05:37:12 96.252.121.186 Report to Moderator	Re: Snow plow pics in reply to soundguy, 07-31-2012 05:13:01   The PO told me it came off a 3000 but that it had also been on a larger Ford thousand series as well. Hmm. I don't have a lot invested in it. I guess I'll do a quick test to see if his existing mods allow it to fit either of my machines and report back. So it's the 19-439 or 19-568 frame that I would need, and the 19-440 hydraulic lift kit if I want the one made for the thousand series? The parts diagrams at Messicks don't really say the years where the frames apply, but I can kind of guess by looking at pictures. Thanks Ultradog! Greg   [Reply]  [No Email]
Ultradog MN 07-31-2012 05:49:15 70.56.167.59 Report to Moderator	Re: Snow plow pics in reply to Greg Wolodkin, 07-31-2012 05:37:12   My plow frame is up north but Kenny has one for a 3 cyl at the shop. I could get photos of it if you wanted.   [Reply]  [No Email]
Ultradog MN 07-31-2012 05:24:48 70.56.167.59 Report to Moderator	Re: Snow plow pics in reply to Greg Wolodkin, 07-31-2012 05:13:01   That unit is for a prior (4 cyl) tractor. You knew that? Wont fit on a 3 cyl without heavy mods.   [Reply]  [No Email]