4610 Instrument panel wiring

Does anyone have a wiring diagram for the instrument panel in a 4610? Rats have chewed most of the wiring on the back of my instrument panel. Some of the wiring is completely gone. Those pesky b*stards even chewed some of the wires down to the connector so I can't match wire colors to patch it up.
 
I can't help you with a wiring diagram. I think they are in short supply. I do have an I&T shop manual for 4610. I bought a tractor I thought was a 4610 and later learned it is a 4000. It had the same problem yours has with rat nests and wiring. I also bought a heat sender for a 4610 that I don't need.
Butch
 
I ordered a I&T manual a couple days ago. Ideally what I would like would be a photo of the back of a 4610 instrument panel complete with wiring. If anyone could help me with that, I'd appreciate it.
 
I have a 4610 series II. The cluster is upside down in the photo of the back. The Purple and black wires go to the dash lights. All other hot wires are red with lt. blue stripe. The hot to the fuel and temp are daisy chained red wires. Ground is daisy chained black. Grn with blue or black stripe goes to fuel gauge. Solid Grn goes to temp gauge. There is a red with lt. blue stripe going to each of the warning lights. Oil gets a solid Lt. blue, Air gets a Dk. blue with yellow stripe, and Battery gets a Lt. blue with red stripe. Left to right from drivers seat the warning lights are Battery, Air, blank, Oil. Hope this helps.
Clusterback.jpg

a8756.jpg
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top