|
| |
| Harry Ferguson Tractors Discussion Forum |
Topic: any tips .....
[Return to Forum]
| Author |
[Modern View]
|
| s19438
08-28-2012 11:20:42
72.94.45.81
|
on how to remove a steering wheel on a 55 to-35 without destroying the wheel? (it's keyed)
i've had em be stubborn before but never like this one.
thanks.
|
|
|
| 2tractors
08-28-2012 13:33:58
207.144.5.133
|
|
Re: any tips ..... in reply to s19438, 08-28-2012 11:20:42
|
|
| I used a three pronged puller and 3 old lawn mower blades. Bungee the blades to under side of wheel and catch them with the puller, tighten the bolt and hit with a hammer.Worked for me!!
|
|
|
| Jeff-oh
08-28-2012 13:18:59
69.174.58.132
|
|
Re: any tips ..... in reply to s19438, 08-28-2012 11:20:42
|
|
| | Here is an article I wrote for the Ferguson Furrows a year or so back. Jeff
|
|
|
| s19438
08-28-2012 13:39:13
72.94.45.81
|
|
Re: any tips ..... in reply to Jeff-oh, 08-28-2012 13:18:59
|
|
| i have the same puller you have pictured but the steering wheel in your pic looks nothing like mine as mine has the spokes rubber coated and i am trying to not break up the rubber. the chain link tensioner may work, if i can find one here abouts.
i have taken more than a few steering wheels off fergusons and fords but this sucker is just plain stubborn.
|
|
|
| Jeff-oh
08-29-2012 05:00:11
69.174.58.132
|
|
Re: any tips ..... in reply to s19438, 08-28-2012 13:39:13
|
|
| I got mine at Home Depot or Lowes. It was only $0.79 or so. any ring like item will do.
|
|
|
| PackardV8
08-28-2012 11:32:28
64.12.116.19
|
|
Re: any tips ..... in reply to s19438, 08-28-2012 11:20:42
|
|
| is it on a taper too????? I would try a puller. Put regular nut on threads just flush with top of threads. Place puller center bolt down against nut with tension on puller bolt. Strike HEAD of puller bolt while gripping steering wheel with your knees and pull up with knees. Check key when removed to see if it has bitten into hub of steering wheel.
|
|
|
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
|
