Author	[Modern View]
jdamman 02-21-2012 06:58:12 174.253.133.220 Report to Moderator	So, I've been reading these cracked block discussions recently. IF a person could find a good used block, what do you suppose fair market value would be? I'm thinking I've seen bare Z134 blocks for sale for around $200; are Z129s and Z120s about the same, or are they more expensive when the do show up due to the shortage of good ones? [Reply]   [No Email]
VTTractoParts 02-24-2012 18:12:17 72.71.201.20 Report to Moderator	Re: TO-30 Z129 block cost in reply to jdamman, 02-21-2012 06:58:12   i just sold a good short block shipped to OH for just under 1200.00 customer is happy. He keeps on coming back for more parts. I have another Z129 block with pistons & liners. Does not have crank. I need to steam clean it to check for cracks. Price on this one prior to shipping 650.00 [Reply]  [No Email]
Elton Fancher 02-22-2012 04:37:32 64.130.137.66 Report to Moderator	Re: TO-30 Z129 block cost in reply to jdamman, 02-21-2012 06:58:12   I have a complete engine in a TO20 that ran but was worn out for $275. [Reply]  [No Email]
block in pa 02-21-2012 09:00:54 75.146.71.89 Report to Moderator	Re: TO-30 Z129 block cost in reply to jdamman, 02-21-2012 06:58:12   I have a good Z129 block and head, complete, $325 located in western pa [Reply]  [No Email]
Jerry/MT 02-21-2012 08:20:18 206.183.116.145 Report to Moderator	Re: TO-30 Z129 block cost in reply to jdamman, 02-21-2012 06:58:12   I"ve seen them on ebay for $400 to $600 for good blocks. You can probably get a repaired one for about the same price. they are somewhat hard to find without cracks, however so that probably puts the price a bit higher; just supply and demand! I"d think that a Z134 bare block at $200 was a real bargain! [Reply]  [No Email]