Author

[Modern View]

buckingbrutus 01-21-2013 08:29:28 192.91.171.34 Report to Moderator

Yes, i have the steering wheel, nut, and like a rubber dust cap (goes below the wheel, above the dash to cover the hole), in addition to what you see. From the AGCO diagrams and other pictures I've seen, looks like I will need the column, bearings, spring, and maybe a few other small parts? I measure about a 4.5inch square bolt pattern on the base, and length should be around 14.5 inches (give or take, just guessing on how high the column should go). Let me know what you find with your stuff Tractor is decent, all hydraulics work fine, but have leaks here and there. Body is good for 60+ years old, although not showroom, but looks soo pretty to me! Looks like the loader and front axle have had some weld repairs, but it's not anything I'm worried about now. Not that it matters much, but I've got a spetic drain field issue that is a priority, so I'm looking to get operational so I can do that, but once that's done I'll have more time/money to fix it up Thanks Again [Reply]   [No Email]