w9 valve adjustment

Rick in Iowa · Mar 15, 2015

whats cold setting for valves on w9?my book only shows hot setting.THANKS AGAIN

kub6040 · Mar 15, 2015

Set close to hot spec' s crank and run till warm
then reset .

Ron in Nebr · Mar 16, 2015

We always used .002 as a rule of thumb. So if hot
is .028(for example), set them cold to .026.

rustred · Mar 16, 2015

that would be a cold setting of .030
always add a couple thou, for cold. when things heat up they grow.
i believe the w9 spec. is .017, so .019 cold.

Ron in Nebr · Mar 18, 2015

Yep, correct, I had it backwards(been a few years).

Our Phone System is Down!