41 Farmall H Hydraulic Lift-all pump

gldebr · Mar 12, 2015

Restoring a 41 H and want to open up the Lift-all unit to see if it looks usable. Was not able to test it before I tore the tractor apart. However, in looking around, I can't find any parts available for this thing. Anyone know where you can get parts for a Lift-All unit?

Zachary Hoyt · Mar 12, 2015

I sold a lot of used ones for $40 but I think I am out now. They are not expensive to buy if you need one, but chances are it may be all right. I would at least test it before you tear it down.
Zach

Janicholson · Mar 12, 2015

Seals can be found (numbers are good) from bearing suppliers. They are pretty bullet proof and unless operated dry, they are usually OK. Don't tear it apart until you try it in action. Jim

David G · Mar 12, 2015

I would agree with the others, drain out whatever is in there, fill with fresh 30W and try it out. They are pretty simple.

gldebr · Mar 13, 2015

Thanks to all three of you. Once the tractor is done, I'll do the tests and see where I'm at.

al71 · Mar 13, 2015

You can find all kinds of these pumps on ebay right now. Al71

41 Farmall H Hydraulic Lift-all pump

gldebr

New User

Zachary Hoyt

Well-known Member

Janicholson

Well-known Member

David G

Well-known Member

gldebr

New User

al71

Member

Similar threads