(800) 853-2651
SHOP NOW

282 head

Don't know what your reference to 282 is here, but an I head engine is valve in head, L head is valve in block engine.
 
what I am looking at is a 560 has a I head and a 660 has a L head
that is what I want to know the difference is and can I put a 660
engine in a 560
 
The only I and L that I know of on one of those engines would be a casting date , not a part number. The 660 engine will fit but might require some changing of mounting hardware, not sure of that.
 
The heads are the same on a 560 and 660 with a D282 engine. If I remember correct the early D282's had smaller valves than the later ones. The only thing is that the injector pump on a 660 has the RPM's turned up to around 22 or 2300 RPM's and the 560 is set around 1800 RPM. That is how they get a little more hp out of the 660 and the transmission was geared lower than the 560. I don't know where you are getting a I head and L head? Are you looking at a casting letter on the head? Also the head on a D301 used on the 715 combines uses the same head as the D282. The 560 & 660 engines will interchange. Just the injector pumps set at different RPM's
 
yes, its exactly the same engine. difference is in pump setting, 560=1800 rpm. 660=2400 rpm.
 
You must log in or register to reply here.

Similar threads

K
Farmall 560
Replies
10
Views
495
EFV
E
A
Oliver super 88 head
Replies
1
Views
373
chucksoliver77
C
B
H 9 speed again
Replies
2
Views
469
D Slater
D
T
434
Replies
3
Views
158
toole
T
T
Block Heater Elimination 656
Replies
9
Views
310
BarnyardEngineering
BarnyardEngineering
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top