wildernessbob2063
New User
This morning I'm putting my power steering back together on my 330 and am having some friction when I turn the wheel all the way one direction. The photo shows the piston gears when the pump is all the way compressed. does the mesh look correct?
When I turn the wheel all the way the other direction there is some friction the last 1/2 turn. It appears the plate the piston is attached to is bottoming out? When the piston is removed there is no friction.
I'm thinking the piston gears are not aligned correctly?
I took the steering assembly apart and the gears for each shaft align perfectly in the center of each other.
Any thoughts?
When I turn the wheel all the way the other direction there is some friction the last 1/2 turn. It appears the plate the piston is attached to is bottoming out? When the piston is removed there is no friction.
I'm thinking the piston gears are not aligned correctly?
I took the steering assembly apart and the gears for each shaft align perfectly in the center of each other.
Any thoughts?