McCormack Disk Plow

grampsh1

Member
Does anyone know where I might get a setup manual for a c200 disk plow need some measurements for fast hitch yoke to front disc for furrow width have taken mine a part to clean up and paint and did not measure where yoke fastened to plow body to replace at proper measurement also someone had repainted at one time all red but believe disk hubs, tailwheel and disk scrapers were blue any info would be appreciated
Thanks
Paul
 
I can get you measurements and/or pictures of the McCormick C-200 Disk Plow I have that is restored. Let me know if interested. For colors you will have red (frame), blue (tail/furrow wheel), black (disk blades), and white for the gauge wheel rim.
 
that would be great you mention a white depth wheel I just have a tipping stand leg on the hitch yoke left side pictures would be great I took some pictures today will try and post them
 
http://photos.yesterdaystractors.com/gallery/uptest/a179077_sml.jpg
a179077.jpg
 
It's adjustable to the wheel width on your tractor. Set your wheels
all the way in, put the plow on the tractor, and then line up the
plow so the front disc dumps its load behind the wheel/in the
furrow. If I'm remembering correctly mine is set so the center of the
front disc is lined up on the inside of the the right wheel.

There is no set measurement.

That all applies if your going to use it. You may have to adjust it if
your not happy with the way it's plowing.

If it's a show piece it doesn't matter.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top