IAtractorKid
Member
Thought you guys might enjoy some pictures of my 606. Making good progress on it. So far have done the following:
Flushed gas tank
Rebuilt carb - need to find some parts for this!
Adjusted valves
New plugs & wires
Re-cored radiator
Replaced thermostat
Installed freeze plug heater
Changed all fluids and filters
New front tires
New spindle bushings and wheel bearings
Straightened bent 3pt lift links
Replaced both rear axle seals
New rear tires and rims and probably a few other things I'm forgetting.
Need to pull the brakes apart and check them out and go through the electrical still. I also have not yet torn into the draft control (draft control lever missing) either. Looks like the control lever shaft is broken off.
Flushed gas tank
Rebuilt carb - need to find some parts for this!
Adjusted valves
New plugs & wires
Re-cored radiator
Replaced thermostat
Installed freeze plug heater
Changed all fluids and filters
New front tires
New spindle bushings and wheel bearings
Straightened bent 3pt lift links
Replaced both rear axle seals
New rear tires and rims and probably a few other things I'm forgetting.
Need to pull the brakes apart and check them out and go through the electrical still. I also have not yet torn into the draft control (draft control lever missing) either. Looks like the control lever shaft is broken off.
