Power steering on a 400

Luke470 · Dec 13, 2014

I'm looking at buying a 400 that has an all hydraulic loader, 3pt
conversion, tank heater chains etc...

Apparently the power steering is out on it. What all could be
wrong with it and how expensive a fix might it be?

Janicholson · Dec 13, 2014

They are not difficult. just a in line torque sensor and torque generator. (assuming it is factory) The hydraulics are powered from a priority system in the valve block (from the Built in Hydraulic system) Jim

rustred · Dec 13, 2014

my 400 has its own p.s. pump, it is factory.

Hugh McKinney · Dec 18, 2014

Rustred, while we are on the subject, could you post a pic of how the separate hydraulic pump is mounted on your 400? I am thinking about switching mine to that type of pump for my 450. Thanks. Now back to our regular thread! Hugh

mkirsch · Dec 18, 2014

Gotta figure out what it's got first. If it's got the separate pump it might be as simple as that pump being no good or out of oil.

D Slater · Dec 18, 2014

Think if you have farmall 400 with a separate pump for the power steering its not factory. Yes it could be factory if you have a international or W 400 tractor.

rustred · Dec 19, 2014

yes, mine is a w400 . pump is separate. nobody ever specifies if its a farmall or standard model.

Power steering on a 400

Our Phone System is Down!

Please use the Contact us Form

We are working to resolve the issue ASAP! Thanks for your patience!

Luke470

Member

Janicholson

Well-known Member

rustred

Well-known Member

Hugh McKinney

Member

mkirsch

Well-known Member

D Slater

Well-known Member

rustred

Well-known Member

Similar threads