656 lost hydraulics followup

fixerupper · Dec 1, 2014

Went over to the neighbor's today to give him a lift with this tractor. It is the PTO splines and it's in town getting fixed now. It wouldn't run because the wire to the carb solenoid had come partly unplugged. Got it going and boy did it squeal and grind but we used another tractor with long hoses to run the loader to get the loader off and I backed it on the trailer under it's own noisy power. Just thought I'd let you know. Jim

Owen Aaland · Dec 1, 2014

Thank you for letting us know what you found.

Cory Schmidt · Dec 2, 2014

good to know the problem, don't want to see bill

Owen Aaland · Dec 3, 2014

The bill should be the same as a normal clutch job. The parts that wore out are normally going to be replaced when the clutch is replaced but normally the clutch would wear out first.

656 lost hydraulics followup

fixerupper

Well-known Member

Owen Aaland

Well-known Member

Cory Schmidt

Well-known Member

Owen Aaland

Well-known Member

Similar threads