Wheel nuts on Farmall H

james06 · Oct 3, 2014

How do you loosen the nuts on the rear wheels on a farmall H? I have used WD40, Mouse Milk and liquid wrench to no avail. I have used impact wrenches and 1/2 inch socket with a 4ft bar. Should I use heat on the nuts or just cut them off?

IAtractorKid · Oct 3, 2014

Get them cherry red with the torch, and then use the impact on them. They should come right off.

DeltaRed · Oct 3, 2014

3/4 drive and 6 ft cheater.Either they come loose or they twist off.

gene bender · Oct 4, 2014

GordoSD · Oct 4, 2014

No one uses the old nuts or bolts after they get them off. Cut them

rustred · Oct 4, 2014

use an air punch on the sides of nuts and lube at same time. vibration works.

pete 23 · Oct 4, 2014

I like the air punch also. Gets their attention. Did a set this summer on a 1066 and never lost a nut. (didn't have any handy).

Wheel nuts on Farmall H

james06

New User

IAtractorKid

Member

DeltaRed

Well-known Member

gene bender

Well-known Member

GordoSD

Well-known Member

rustred

Well-known Member

pete 23

Well-known Member

Similar threads