md fuel gauge

keets · Oct 1, 2014

Does any one know what kind of adapter it take to screw the fuel pressure gauge into the pump . I boughthe gauge but the nipple coming out the back is to short to screw in to the pump any information will be helpful thank you.

Farmaller · Oct 1, 2014

You need the brass extention, about an inch long, male on one end, female on the other end, did you not have a gauge before?

keets · Oct 2, 2014

no it just had a plug in it.

Farmaller · Oct 2, 2014

You could get a brass coupling and close nipple at the hardware store, if not I can look to see if I have one, I have pumps that I have tore down for parts

sflem849 · Oct 4, 2014

(quoted from post at 17:30:40 10/02/14) You could get a brass coupling and close nipple at the hardware store, if not I can look to see if I have one, I have pumps that I have tore down for parts

Is it the same part on a 9?

Farmaller · Oct 5, 2014

Yes, they are the same.

md fuel gauge

keets

Member

Farmaller

Member

keets

Member

Farmaller

Member

sflem849

Well-known Member

Farmaller

Member

Similar threads