574 I-H ....lift the hydraulic unit off rear end housing

Big Als acres · Aug 4, 2014

I get to remove the hydraulic assembly off the top of the rear axle housing, in order to access and replace a broken PTO output shaft. What should I watch for as I prep and lift the hydraulic assembly from the rear axle housing? I would sooner not have any unforeseen surprises as I complete this repair.
Al

Bernard le mecano · Aug 4, 2014

Hi, you can remove the fenders and the sheet under the seat assembly. Remove all the dirt before loosing all the bolts that secure the unit in place. Remove the hydrolic pipe that run over the unit. You have to change the gasket and the 3 O rings under the unit. Check the Orings when you put the unit in place and you have to bleed the brake. Bernard in Quebec Canada

574 I-H ....lift the hydraulic unit off rear end housing

Big Als acres

Member

Bernard le mecano

Member

Similar threads