IH 886 speed adjustment for 3 point lift

Hello

i put a cultivator in the back of my 886 and when i put it down
it just fall free to the ground (very fast)
is there any adjust screw or anything so i could lower the cultivator slowly?

Thanks
Kalle from sweden

You could use the draft control I guess, but I'd
sure want 'er to drop in a hurry with a cultivator.

Allan

Hello

the implement drops so hard that im worried that something will break apart.

i cant use the draft contol i have tryed it and it is no different other than it doesent lift up at all
it struggles but cant lft it up

or how can i adjust it

i tryed to put the left lever in the front position and the right lever to lift it up but it didn´t lift it

Thanks Kalle

You can use the draft control. It gets to be a little complex and unhandy but will work. To start, put position control lever down to the offset. Do not at this time go past the offset. If your levers are working right you can feel the offset without even looking but so many levers are not adjusted right so hard to tell from here. From offset on down to end of slot is what is called action control. On the lifting cycle, it dumps oil so slower lift, on lowering cycle it blocks return so slower lowering.
Now, pull draft control lever all the way. Hitch should lift to near full height(it will not lift quite as high as it will with position control lever). Next, put position control lever fully forward in slot, now push draft control lever forward all the way. Hitch should drop slowly and if you pull position control lever back a little at a time you should be able to control the drop.
Like I said, kind of a three handed game but it can be done. Other option is to pull rear cover, block a port inside between draft control and action control valve, install an adjustable external control that you control drop speed from inside cab.

ok

i will try this tonight
but should it really be like this
i have never had a tractor that drops the 3 Point like this???

Thanks Kalle from sweden