hydraulic oil level on 140

Anonymous-0 · Jul 16, 2014

I see a fill plug and a drain plug on the hydraulic block of the 140, but no full level plug. How do you know the proper full level? And what type hydraulic oil to use?

TractormanNC · Jul 16, 2014

With both rockshafts to the rear, full is at the bottom of the threads in the fill hole.

CIH Hytran or any good tractor/hydraulic fluid that meets CIH specs.

Paul Bertrand · Jul 25, 2014

Tractorman, when you say both rockshaft arms to the rear, do you mean they are pointing toward the rear tires and implements would be in the down position? I checked it with the rockshaft arms pointing toward the rear tires and implements down, and also the opposite way (impliments all the way up). Both ways showed it was low of fluid. I just want to make sure I fill it in the proper position. thanks for all your help,it's much apprciated.

RTR · Jul 25, 2014

(quoted from post at 17:46:36 07/25/14) Tractorman, when you say both rockshaft arms to the rear, do you mean they are pointing toward the rear tires and implements would be in the down position? I checked it with the rockshaft arms pointing toward the rear tires and implements down, and also the opposite way (impliments all the way up). Both ways showed it was low of fluid. I just want to make sure I fill it in the proper position. thanks for all your help,it's much apprciated.

Just fill it full til it runs out!!!!!!

hydraulic oil level on 140

Anonymous-0

Well-known Member

TractormanNC

Member

Paul Bertrand

New User

RTR

Well-known Member

Similar threads