(800) 853-2651
SHOP NOW

BN Governor

D

DaveBN

Member
Location
Western lower Michigan
I've lost throttle response in my 1947 BN. I suspect that the spring in the governor has broken and my mosquito's and I are trying to replace it. So far we have removed the magnito, hood, grill and fan shroud and bracket. Next I suspect the cover on the front of the governor needs to come off. Is that correct? Any hints on this as the bolts on the back side will be hard to get to. Gene B has given suggestions on rebuilding govenors and I can't find them in the archives. Can I get the "bearings" from Case/IH? Yes, I have marked the locations of the magnito and govenor drive.
Thanks for any help and I,m sorry for the repeated question.

Dave
 
You probably didn't need to remove the magneto or most of the other stuff, but now that you have them off, it will make access easier.

Yes, Case/IH should have all the bearings and springs for it. The case where the input shaft from the governor control goes through is often worn badly. You will need to drill or ream it out and put a bushing in to get the slop out of it. I got my bushings from McMaster-Carr, but any machine shop should have them, or can get them for you. Gene says he gets them at Lowes, but I haven't looked for them there.
 
You must log in or register to reply here.

Similar threads

G
Super M with Chevy V-8 Governor
Replies
9
Views
645
Tramway Guy
T
7
New Holland LX 565 skid steer that doesn't seems to have governor response after overhaul
Replies
0
Views
147
7000Eric
7
K
1929 GP Throttle/Governor Issue
Replies
1
Views
295
ET
E
B
Kawasaki speed adjustment?
Replies
5
Views
371
blueridge
B
C
Putting a woods L59 belly mower on a farmall BN
Replies
6
Views
532
grandpa Love
grandpa Love
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top