560 bad pump?

morgan in ar · Jul 12, 2014

So, I broke the pto shaft on my allis 6680 yesterday, so I hooked the discbine to my 560 gas. At first, it would lift the mower. After I made a couple of rounds, it would only lift it halfway, and very slowly. It would still operate the hydraulic swing on. What do you think?

DeltaRed · Jul 12, 2014

A 560 doesnt have enough poop to raise a heavy haybine.Run a pressure test at the remote. then you will know the condition of your pump.However,the reduced lift after it gets warm is indictive of a worn pump.

morgan in ar · Jul 12, 2014

(quoted from post at 02:24:16 07/13/14) A 560 doesnt have enough poop to raise a heavy haybine.Run a pressure test at the remote. then you will know the condition of your pump.However,the reduced lift after it gets warm is indictive of a worn pump.

hat should the pressure be?

DeltaRed · Jul 12, 2014

That I really dont know.Somewhere around 1200 to 1400(?)

560 bad pump?

Our Phone System is Down!

Please use the Contact us Form

We are working to resolve the issue ASAP! Thanks for your patience!

morgan in ar

Member

DeltaRed

Well-known Member

morgan in ar

Member

DeltaRed

Well-known Member

Similar threads