806 706 front axle

BT in NE · Jul 12, 2014

I have a 1964 706 gas with a narrow front, and I know where an 806 diesel with a wide front is about to be scrapped. Will these interchange or is there more to it? I would like to put the wide front on my tractor as it has a loader. Thanks for any help. BT

sd pete · Jul 12, 2014

That should be a go. The front ends should be the same. As long as both are rowcrop.

DeltaRed · Jul 12, 2014

Yes.As long as they are both Farmalls.That front will fit from M up through 1256.If you can,buy the complete tractor. There are a LOT of parts(trans;rear end;hitch;fenders;chassis.......) that will interchange

BT in NE · Jul 12, 2014

Thanks for responding. I had hopes that it would work, but wanted reinforcement. BT

mazemeister · Jul 13, 2014

I would say snag at 806. Depending on why its being scrapped you could do a major upgrade to that d361. The front ends as well as everything behind the flywheel should interchange.

Matt Tieken · Jul 15, 2014

(quoted from post at 16:39:03 07/13/14) I would say snag at 806. Depending on why its being scrapped you could do a major upgrade to that d361. The front ends as well as everything behind the flywheel should interchange.

I SECOND THAT EMOTION!

806 706 front axle

BT in NE

Member

sd pete

Well-known Member

DeltaRed

Well-known Member

BT in NE

Member

mazemeister

Member

Matt Tieken

Member

Similar threads