48841D Pivot Pin Bushings

Wondering where people are buying these bushings? It is a WFE pivot pin bushing for 1.232" pin on Farmall tractors. They are $43 each from IH and I have found the a lot cheaper online but the first set I ordered that was supposedly a direct match, was almost 1/8" too big on the ID. Just curious what suppliers people have used and if the bushings were correct.
 
Buy a bushing in the correct OD size and either bore it to fit or ream it to fit. A brake cylinder hone will work if it is close. You will with this form have to fit it to the shaft after it is in the casting to account for crush as it is pressed in.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top