engine tries to stall under load.

EDW · Jun 12, 2014

Hello Folks, Farmall "C" stalls when put under a engine load. Unless I let the clutch out very-very slowly, she dies. All advice is appreciated. Thanks in advance.

El Toro · Jun 12, 2014

Try using the choke to see if that helps. If it helps check the flow of gas from the gas to your carburetor. If there's a full stream of gas remove the tube fitting where the gas line connects and look for a screen that may be plugged. If that looks ok your carburetor probably needs a good soaking in carburetor cleaner and all the jets cleaned. Hal

rhtx55 · Jun 12, 2014

Turn the main jet on the carb out (counter clockwise) two full turns.

CNKS · Jun 12, 2014

There is no adjustment for the main jet on the C gas carburetor. There is on kerosene/distillate carbs.

engine tries to stall under load.

EDW

Member

El Toro

Well-known Member

rhtx55

Member

CNKS

Well-known Member

Similar threads