Fast hitch 3 point adapter

Tom Ollie · May 30, 2014

I bought a used fast hitch 3 point adapter for my SMTA. I would like to use my generic 3 point blade with this tractor. It appears (have not tried attaching any 3 point equipment to the SMTA) that the top link I use with my Ford 901 will be too long when I put the blade on the SMTA. Am I going to need a shorter top length, if so does anyone know what length works best and where to purchase one?

Janicholson · May 30, 2014

Assuming your adapter has the top link mount as a structural feature, My best input would be to hook up the blade and lift the hitch until the blade hitch is close to level. Then measure between the top link attachment on both the blade and adapter. Find a generic top link that can go both shorter or longer than this link. Jim

504 · May 30, 2014

I have made a few from flat steel, just set the implement where you want it measure the length and touch one out.

tractordanp · May 31, 2014

My 460 came with fast hitch to 3 point adapter and I did not like the top link set up it came with so I made one and I see they have them on eBay just like I made here is a link to see what it looks like
It makes it so you can use most any generic top link
Untitled URL Link

wolfman · May 31, 2014

That Fast Hitch 3-pt adapter comes with a special top link. It is short.

Fast hitch 3 point adapter

Tom Ollie

New User

Janicholson

Well-known Member

504

Well-known Member

tractordanp

Member

wolfman

Well-known Member

Similar threads