farmall 350 wont go in to 5th gear

Anonymous-0 · May 28, 2014

how big of a job to fix. ,also tractor is hard to shift on the high side of the ta,like its on a bind. i pull the ta back it shits fine.

D Slater · May 28, 2014

Guess fifth worked before the trouble? Does the shift lever move to fifth or won't move to fifth?
If it shifts to forth and 5th worked before, remove the belt pulley gear box or the opening cover to see if the fork and gear is moving, or if the teeth that lock fifth and the input shaft are the problem. If a fork problem the top cover needs removed. If a input shaft is needed the center section needs removed. If 4th and 5th slider and the input shaft is bad top cover and center needs removed.
T/A clutch is supposed to release when the clutch pedal is depressed, same as what you do when pulling the t/a handle back. Need to adjust linkages.

Wayne in MN · May 28, 2014

Adjust the TA linkage! Follow the owner's manual procedures carefully.

mkirsch · May 29, 2014

It *IS* in a bind. The TA linkage is out of adjustment, particularly that short link that connects the main clutch arm to the TA clutch arm on the left side of the center section of the tractor.

When you push the clutch, that little link shifts the TA into low range so you can shift the main transmission.

If it's working right, you can hold the clutch at 1/2 out and the tractor will not roll backwards.

farmall 350 wont go in to 5th gear

Anonymous-0

Well-known Member

D Slater

Well-known Member

Wayne in MN

Well-known Member

mkirsch

Well-known Member

Similar threads