Our Phone System is Down!

Ellis Kinney · May 27, 2014

Farmall Super MTA with Independent PTO. I couldn't find any 10wt non detergent motor oil to do an oil change, so I used Hi-Tran. I filled it and mowed a field and changed it again because it was really dirty. Question, should I use the Hi-Tran or does anyone know where to find 10wt non detergent motor oil? That is what my owners manual calls for. Thanks, Ellis

sd pete · May 27, 2014

IHC changed it to Hytran years ago. Just keep using it will be fine.

Nebraska Kirk · May 27, 2014

Hytran will be fine, that is what I used in the IPTO on my 400.

souNdguy · May 27, 2014

i'd use utf as well.

ps. most compressor oils are ND unless synthetic.

last time i was in walmart and tractor supply they had a selection of non det oils too.

just saying. I'd use the utf myself.

Hugh McKinney · May 27, 2014

Tractor Supply has it in five gallon buckets, it's 10w, non-detergent. It is labeled "motor oil" but it is what I'm now using in my 450 PTO.

the tractor vet · May 28, 2014

You use nothing but the Hy trans in the transmission , rearend and PTO . They did away with the 10 W stuff years ago at the same time they did away with the 80-90 in the trans and rear end .

Rumplestiltskin · May 28, 2014

Hi, Ellis.

My N@P@ store had quarts of 10W on the shelf when I was looking for some. I'm not sure it was non-detergent, though. It was interesting stuff -- crystal clear and it flowed like mineral oil.

Mark W. in MI

PTO

Our Phone System is Down!

Please use the Contact us Form

We are working to resolve the issue ASAP! Thanks for your patience!

Ellis Kinney

Well-known Member

sd pete

Well-known Member

Nebraska Kirk

Well-known Member

souNdguy

Well-known Member

Hugh McKinney

Member

the tractor vet

Well-known Member

Rumplestiltskin

Member

Similar threads