1086 lift

gbs · May 23, 2014

what causes the lift to shutter when lowering with and implement attached

Dave H (MI) · May 24, 2014

Can't tell you for sure but when I have trouble with hydraulics I do the following:

Make sure I have enough rpms, check my hose connections and gate valves if applicable, Look in the implement manual to see if maybe the lines need to be bled of air. Only ran into that last one once and it was planter markers.

gbs · May 24, 2014

the lift I was referring to is the 3 point hitch sorry for the confusion

T in NE · May 26, 2014

If it was while raising the first time after sitting, I'd say it's losing prime, try moving the draft control all the way to "heavy" and see what it does.
But on the way down, I wouldn't have a clue.

1086 lift

gbs

Member

Dave H (MI)

Well-known Member

gbs

Member

T in NE

Well-known Member

Similar threads