F series experts again

James Williams · May 23, 2014

Some one put a hyd. pump on my Waukesha,can I remove it and plate it off?By looking at it looks like its a different rear compaired to non hyd.

jimmy

James Williams · May 23, 2014

Im sorry,I see where the plate unbolts from the trany,looks like it can be removed and a blank plate installed.If any one has dis mantled or installed please let me know if thres any thing else involved

jimmy

MJ in the UK · May 23, 2014

Hi James, am I right in thinking on the F12 the hydraulic pump was offerd a long time after they stopped using the Waukesha engines. MJ

Charlie M · May 23, 2014

Since the pump wasn't on the tractor when it was made it had to be added on which means it can be taken off. Is it the pump that was on later tractors with the pump on the side and the reservoir under the seat? If its like my F14 you will have to remove the transmission cover to get the bolts out of the pump.

DC Snider · May 23, 2014

The only issue I can think of is the bearing retainer. It'll have to be removed somehow.

Other than that, just a gasket and cap. Here's a grainy picture of the area on mine when I had the pump removed and some issues I had reinstalling the pump.

http://forums.yesterdaystractors.com/viewtopic.php?t=1105356&highlight=

Ron Weber · May 23, 2014

Where are you at Jimmy? I am in South East Michigan and I am looking for a hydraulic attachment. If we made a deal, I would provide you with the correct casting to put it back to the original way.

Fawteen · May 25, 2014

On my F14, the pump casting replaces the bearing retainer on the left (as you face forward) side of the transmission mainshaft.

If you need a replacement bearing retainer, I have one.

pfoxy AT yahoo DOT com, with the usual mods.

F series experts again

James Williams

Well-known Member

James Williams

Well-known Member

MJ in the UK

Member

Charlie M

Well-known Member

DC Snider

Member

Ron Weber

Member

Fawteen

Well-known Member

Similar threads