886 hydraulic hose connection problem

Anonymous-0 · May 8, 2014

We are having issues with keeping hoses connected to the back of our 886. We were wondering if IH made a slightly larger female end. We run pioneer on everything and this is the only tractor we have this issuewith

Allan in NE · May 8, 2014

I hate those ISOs with a passion.

I like the older IH couplers with the levers. A good positive connection.

Allan

the tractor vet · May 8, 2014

Either change your couplers OR your hoses are to short

pete 23 · May 8, 2014

When working on a job yesterday, the owners pulled in the shop to unhook the corn planter. They just finished up the corn. Try as they might they could not get two hoses out of those iso couplers on a two year old Versatile MFD. I went over as they asked for suggestions. Told them they had to run the engine and operate the control to release pressure as the valves have a check valve built in them to prevent leak down and it requires pressure from the back side to release that pressure in the coupler. It still took a good tug but they got both pulled out. The were not impressed with the couplers. Also, their CASEIH Steiger likes to spit out hoses at times. I kind like the IH couplers with the lever also. If you install the after marked lever that allows you to pull the coupler toward you it makes them work pretty good.

caterpillar guy · May 10, 2014

I hate to say it but the ISO is the same as the old pioneer's. We use them interchangeably. The old small IH will fit and work with them just fine.

886 hydraulic hose connection problem

Anonymous-0

Well-known Member

Allan in NE

Well-known Member

the tractor vet

Well-known Member

pete 23

Well-known Member

caterpillar guy

Well-known Member

Similar threads