300 IPTO removal

Bkpigs · May 3, 2014

Trying to remove the IPTO unit from an IH300 with no luck. I removed the four larger bolts from the rear and couldn't get the unit removed. I then decided to remove the rear plate to make sure there was no hidden bolts. Still can't get it off. When I pry I am getting a small gap between the trans and the unit but no matter how much I pry I get nothing more. The I&T manual is kinda confusing with the pictures. One picture shows it should split between the at the first seam between the trans and PTO unit and the next looks like it should split at the second seam right infront of the reactor band housing. Am I missing something? Thanks in advance!

Bkpigs · May 3, 2014

with a little more prying, I got it off.

Cub149 · May 3, 2014

(quoted from post at 21:55:27 05/03/14) with a little more prying, I got it off.

I remember mine taking a lot of effort to get out.

Zachary Hoyt · May 3, 2014

I remember I damaged the O ring on mine getting the IPTO out and
had to buy a new one and wait for it to be delivered.
Zach

300 IPTO removal

Bkpigs

Member

Bkpigs

Member

Cub149

Member

Zachary Hoyt

Well-known Member

Similar threads