3pt sickle mower model?

Eldon (WA) · Apr 28, 2014

I bought a bunch of equipment today and one of the pieces was an IH 3pt 7 ft sickle mower. It has a tubular arch for the top link, long belt drive and a roller mechanism on the LH side that I assume picks up the bar when you raise the 3pt. Can anyone tell me the model number? I am missing the pin to drive the sickle....

tractordanp · Apr 29, 2014

Sounds like a number 100 balanced head mower I have 2 one
is fasthitch one is 3 point
On the fasthitch one the thing on left side goes under 3 point
arm and when adjusted correct it will lift bar when you pick
arms when down it will let the bar float
Very good mower only complaint I have with mine is if it gets
pluged up the mower runs so smooth it will not shake the plug
off like a old pitmen mower guess you can't call that a problem
Good luck dan

Eldon (WA) · Apr 30, 2014

Thanks, Looks like that is the model. Any idea of where to get a drive pin for the sickle? It also needs a new ledger plate for the outer shoe...is that special to IH? Otherwise the gearbox appears nice and tight, guards are good...

Eldon (WA) · May 5, 2014

(quoted from post at 02:31:09 04/29/14) Sounds like a number 100 balanced head mower I have 2 one
is fasthitch one is 3 point
On the fasthitch one the thing on left side goes under 3 point
arm and when adjusted correct it will lift bar when you pick
arms when down it will let the bar float
Very good mower only complaint I have with mine is if it gets
pluged up the mower runs so smooth it will not shake the plug
off like a old pitmen mower guess you can't call that a problem
Good luck dan

Made a pin for it today, got the pto loose, changed a couple of hold-downs and hooked her up to the tractor. It sure does run smooth! Put her on CL for $450...will see how long it takes to sell.

3pt sickle mower model?

Eldon (WA)

Well-known Member

tractordanp

Member

Eldon (WA)

Well-known Member

Eldon (WA)

Well-known Member

Similar threads