Will this mower work on my Super C

rhatch2nd · Apr 27, 2014

Hi,

I am in need of a nice belly mower for my Super C. Can anyone look at this ad and tell me how hard it would be to mount this on my Super C?

Thanks,

http://desmoines.craigslist.org/grd/4418415038.html

Anonymous-0 · Apr 27, 2014

I put an Allis Chalmers G deck on a A, That should be a piece of cake

leeedwin9 · Apr 27, 2014

The Woods L306 is made to fit the Farmall C and Super C. The tractor mount that fit the 404 should fit your tractor if the 404 was a row crop version. --Lee

leon · Apr 28, 2014

I bought a Super C several years ago just a few miles from where this mower is located. I had no use for the mower so for a few bucks off the tractor's price, I left the mower behind. This could be the same mower. Even if not, it looks like it would very easily go on a Super C.

mkirsch · Apr 28, 2014

Even if it is a 404 utility, it will fit the Super C. The axle housings are the same, so the mounting brackets will clamp right on in the correct location.

The only problem you may run into is getting the mower close enough to the ground, due to the 404 being lower.

Watch that big pulley on a Super C, because you have to climb on from the back. It looks like a man killer.

gene bender · Apr 28, 2014

Ihave the mounts for a SC drive is for belt pulley will work for Woods 59 or 306 either right hand or left. 319-430-3907

rhatch2nd · Apr 29, 2014

(quoted from post at 20:45:28 04/28/14) Ihave the mounts for a SC drive is for belt pulley will work for Woods 59 or 306 either right hand or left. 319-430-3907

Hi,

This mower was sold before I got to it. I may have found another one. Would this one work? And would I need to buy the mounts from you? Thanks for the help.

http://cedarrapids.craigslist.org/grd/4442784157.html

Will this mower work on my Super C

rhatch2nd

Member

Anonymous-0

Well-known Member

leeedwin9

Member

leon

Well-known Member

mkirsch

Well-known Member

gene bender

Well-known Member

rhatch2nd

Member

Similar threads