One more Super C fast hitch question

Rex Simpkins · Apr 8, 2014

I am in the process on setting tractor up with C-20 two bottom fast hitch plow, now for the question when hooking up the adjusting link (bellcrank) that runs forward to the touch control box. What do I do with the piece that was hooked up and is hooked to the brake drum Does it just lay there hooked to nothing or am I suppose to remove it from the tractor???

Farmallhal · Apr 8, 2014

Rex, That is sort of your choice I believe as long as it doesn't interfere with the movement of the adjusting link. I don't have a C-20 plow operators or setting up instructions manual so don't know what is noted as preferable by IH. If you do remove it watch for the small bushing between the bolt and the level lock casting as they are difficult to locate and obtain. I always keep mine together with a locking plastic tie strap when off the tractor, Hal.

gab · Apr 8, 2014

I took mine off but I think it can just lay there

Wayne in MN · Apr 8, 2014

Let it lay there; won't loose any parts then.

Rex Simpkins · Apr 8, 2014

Gotcha! Thanks again fellows

Rick Remmert · Apr 8, 2014

I take mine off when I use my rotary mower. I did not want to take a chance of it getting in a bind. Like the other guy said, don"t lose the bushing.

Dean Olson · Apr 9, 2014

I leave mine on. Never had a problem.

One more Super C fast hitch question

Rex Simpkins

Member

Farmallhal

Well-known Member

gab

Well-known Member

Wayne in MN

Well-known Member

Rex Simpkins

Member

Rick Remmert

Member

Dean Olson

Well-known Member

Similar threads