(800) 853-2651
SHOP NOW

Bremuda Ken

D

DeltaRed

Well-known Member
Awhile back in RPM you wrote about a square oring to stop the oil pump leak on 361/407 engines.My 1256 leaks.I 've 'reringed' with the genuine IH ring several times.The housing is so worn that it has a groove.Nothing has helped the leak.Where can I get that special square oring? can you supply it? This '12' has 20,000 hrsThank you. Steve
 
I just looked on McMaster-Carr's website, they have a large selection of cross sectional size and diameters, even if they don't have the exact size you need, you can get a larger one, cut it to size and super glue it back together, BTDT.
Only problem is, you might need to get a pack.
 
There are two things you can do here . (1) you can get the housings new or atleast they USE to be avil. or (2) you can have it machined out and have a sleeve made and pressed in as i have done that . If you go the sleeve deal use a little Loc tite to seal the repair sleeve to the housing and bevel the edge of the repair sleeve so that when you put the tube with new O/Ring in it does not tear it .
 
You must log in or register to reply here.

Similar threads

N
4620 Reservoir Drainback Fixed
Replies
8
Views
2K
newgenjdcollector
N
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top