Farmall 400 PTO Locking Plate / guide bracket

Ziggy1979 · Apr 7, 2014

I am looking for one of these plates that will allow the PTO to remain engaged or disengaged without the use of bungee cords on the PTO lever!

Does anyone have one, or know of a source where I can order one?

Thanks!

Ziggy1979 · Apr 7, 2014

Here is a photo

$T2eC16ZHJGoE9nuQgkFbBRRPC1hjZw~~60_57.JPG

The 300 guy · Apr 7, 2014

You can buy one from Case IH or you can do like I did, clamp it on a piece of metal and start cutting, grinding, etc. Case's part is NOT cheap!! If you have a plasma cutter, this is simple, but I didn't, so I spend a couple of hours making mine.

Ziggy1979 · Apr 8, 2014

Thanks, I was able to find it on Case IH's website, you aren't kidding, nearly $100 for that one little plate...

I'll keep looking for a used one, but may end up having to fab something up!

Thanks again

Ziggy1979 · Apr 10, 2014

I was able to find one from external_link.com and external_link

I bought the one from external_link.com since it's a little cheaper, heres the wenger one if anyone else ends up looking for one

http://www.external_link/parts/Farm-Tractor-Parts/FARMALL/400/400/PTO/INDEPENDENT-PTO/OPERATING-HANDLE-QUADRANT/01-360178R.htm

Ziggy1979 · Apr 10, 2014

Found one from one of the big salvage yard places, I guess I can't post links here but if anyone else ends up needing one, just google "farmall 360178R"

Farmall 400 PTO Locking Plate / guide bracket

Ziggy1979

New User

Ziggy1979

New User

The 300 guy

Member

Ziggy1979

New User

Ziggy1979

New User

Ziggy1979

New User

Similar threads