Need help with 4 axle parts

I have got a 1586 with a cracked, 38 inch rear wheel, just one of them. It has the 4 inch axle. I found out that the other IH tractors that used the same rear wheel were the 1566, and the 5288 and 5488. No Longer Available from factory. Where might I find such a beast? The part number is 67338C1. Also, if anyone has a hub, for outside duals, that would also be a help, the part number, 67337C1. I live near Shreveport, Louisiana. Any info would be most appreciated. Hugh
 
Parts Depot in Chilton, WI shows 4 of 67338C1 "wheel" in stock. Their McKenzie, TN warehouse shows 3 of 67337C1 "hub" in stock. These will be new parts. Their phone number is 800-743-3768. They won't sell to you, but a Case-IH dealer can order from them.

The 38" wedgelock wheels were/are available new from an aftermarket for 3.25" and maybe 3.5" axles, too. I haven't a clue about an aftermarket one for a 4" axle.

New dual hubs may still be available from Unverferth for a 4" axle.

Some possibilities for used wheels and hubs:

Bates Corp. (Bourbon, IN)
Worthington Ag Parts (multiple yards)
Rock Valley Tractor Parts (Iowa)
All States Ag Parts (multiple yards)

AG
 
This was extremely valuable information, AG, and I'm printing out what you wrote, so I can start calling tomorrow. Thank you very much, Hugh
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top