telite module

gbs · Mar 17, 2014

how do you check the telite module on a 1086,all the lights work with the switch, but not on there own after running a few minutes the low coolant light comes on,at full throttle the filter restriction light comes on for no reason even when both are disconnected from their senders,voltmeter works ok,oil pressure stays from 1/4 to 1/2 range once started,temp. gauge starts at cold and moves to the edge of the red even though it shows no signs of overheating,grd's are good wires have been checked for continuity and shorts

fixerupper · Mar 17, 2014

The only thing that comes to my mind is the circuit board is short circuiting and grounding some of those lights to make them light up. Could be something as simple as wet or even damp dust on the board. Gauges can work the same way. Just my .02. Jim

telite module

gbs

Member

fixerupper

Well-known Member

Similar threads