super c cotton picker back to tractor

bogger · Mar 13, 2014

Ok guys been reading old posts for hours about how to turn the bull gear around in this super c .help me get the steps down.
remove top cover.two bolts hold bull gear to axles. Slide axles out.turn bullgear around to drive on other side of pinion.replaceaxles . Now does top cover work on super c or do i need differnt shift forks.

Janicholson · Mar 13, 2014

Well the bull gears are not turned around, nor would it change the direction of travel if they were.
The differential is what is flipped to drive the ring gear on the opposite side. Top is removed for access. The pinion carriers are removed the ring gear is removed and replaced on the opposite side, and pinion depth and tooth patterns are set (a little tough, but the service manual will have the setting procedure.)
I do not know if the SC needs a different shifter rail setup, H and M do because of interference with the ring gear. Jim

super c cotton picker back to tractor

bogger

New User

Janicholson

Well-known Member

Similar threads