3 point sway limiter

Zeb Klein · Mar 11, 2014

I am going to have to fix the sway limiters on my 966. Anyone ever use IH disgusted or any others style? I just don't think the factory setup is gonna be tight enough and last for very long.
Thanks
Zeb

Bill Lisbon · Mar 11, 2014

I made my own using square bar and square tubing.

Phil Tibbetts · Mar 11, 2014

I like the square tubing type because the threaded ones have a tendency to bind up or turn hard. Also with the square tubing you can just pull the pin out and move the arm in or out easily. IMO

TJV · Mar 11, 2014

We had a set of the sway limiters from Klinger on our 186 to try to keep a semi mounted sprayer (two point hookup and rear caster wheels) from running on the rows but when turning the sprayer put too much force on the arms and the sway limiter was too close to the bottom pivot giving the heavy load too much leverage and we broke 2 draft control shafts in 2 months. they allowed us to return the sway limitors for refund. Klinger Mfg was good to deal with but unless you have a very light load with very limited side pressure, I dont recomend them.

Zeb Klein · Mar 12, 2014

Bill Lisbon
Do you have any pictures of the set up you made out of square tube and square bar?

3 point sway limiter

Zeb Klein

Member

Bill Lisbon

Member

Phil Tibbetts

Well-known Member

TJV

Member

Zeb Klein

Member

Similar threads