Farmall C Axle Brackets

Brian Schmidt · Mar 2, 2014

I have some ideas how to fix this, but I wanted to see if anyone has a better thought or knows of a source for repair.

gene bender · Mar 3, 2014

What are you going to fix those brackets have worked for many years do you have a problem with them

FBH44 · Mar 3, 2014

It looks like you have bent the bolt, then broken the eye out. Have they been severely over-loaded, or shock-loaded? Getting them repaired, straightened, re-welded is one thing, but I"d sure re-evaluate what I had been doing, what else I may have damaged.

Anonymous-0 · Mar 3, 2014

drive cross pin out and replace eye bolt. try McMaster Carr, Case IH, Fastenall and other similar sources for the eye bolt

Brian Schmidt · Mar 3, 2014

The eye bolt broke Gene. It is hanging there by the grace of god.

I will try to find a replacement eye bolt as suggested above.

My fix was going to be to weld a sleeve on the end of the bolt to replace the eye.

Brian Schmidt · Mar 3, 2014

Thanks Leroy. I wasn't aware eye bolts were a common hardware other than the light duty formed ones.

Brian Schmidt · Mar 3, 2014

Thanks FBH44.

Rick Remmert · Mar 3, 2014

Or try a salvage yard and buy the whole assembly.

504 · Mar 3, 2014

I am a tight wad, I would weld it and turn it 180 and put it back on(add a flat and a lock washer behind the nut)

Farmall C Axle Brackets

Brian Schmidt

Member

gene bender

Well-known Member

FBH44

Well-known Member

Anonymous-0

Well-known Member

Brian Schmidt

Member

Brian Schmidt

Member

Brian Schmidt

Member

Rick Remmert

Member

504

Well-known Member

Similar threads