(800) 853-2651
SHOP NOW

Super A Rear Rim Size?

O

Oldtractorfun

Member
Hi all
I was wondering if anybody knew the rear rim size on a Super A? Was out plowing snow today and chains started to make a noise, looked over and tire was comming off the rim, saw a big outside chunk of rim hanging off.
Tire says its a 11.2 x 24, measured the rim and its 11 x 26. Both tires and rims say and measure the same.
Wanted to ask the experts about what rim size I needed before I try to order one. You know some of the help you get at them places, sometimes good sometimes real bad.
thanks
 
I don't think you're measuring right,it should be measured from the inside of the bead for width,which is probably 10 inches and the inside of the bead for dia.which should be 24. Hope that helps.
 
The rims are in fact 24 inch is factory rims. Bet your just not measuring them correctly. My BA has that size and so does my friends super A
 
If it measures 11in outside to outside they would be 10in You can get rims for that tractor from 7in to 15 there are different suppliers of rims that will go on your tractor BUT the four places where they bolt to the center will be differeent in style but still work as the original loops are no longer available. So if you want original factory type you will need to find used. You can grind off the little square mounts on your old ones and get new blank ones and then attach them using rivets. It has been done.If you are going to stay with your 11.5 tires you want the 10in rims. If you wanted new 9.5s get 8in rims.Its up to you your tractor and you can do whatever you like.
Untitled URL Link
 
Yes I was measuring the wrong spot. Tires are in good shape so will stay with the 11 inch rims. Will check the local tractor yards and see if I can find a used rim if not will have to buy a new one.
Thanks all
 
A 11.2 tire has a 10 inch tread, 11.2 is the cross section at the widest place, assuming the pressure is right. The old tire measurement is 10-24, so it appears you have a 10 inch (tread) tire on a 10 inch rim -- couldn't fit better.
 
You must log in or register to reply here.

Similar threads

M
Aftermarket rear rim problems
Replies
13
Views
831
mccormicksw4
M
H
loose rear rim
Replies
4
Views
259
haw river cub
H
O
Field Boss 37 (1988) - Rear Inner and Outer Rim - Part Numbers
Replies
0
Views
132
OaklandTech
O
T
Where to buy a rim for trailer?
Replies
14
Views
978
Tractorcedric
T
C
Rim repair on a Farmall H
Replies
5
Views
347
earl h
E
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top