Cultivators

i live 50 miles east of nashville, i am looking for the part that fastens to the left front of the tractor, on an a, 100, 130, 140
 
You could mount the main frame but liftng it up would be the problem. If you have a setjust mount the frame assy then you will se the problems they could be made to work if you have some iron and a will to do it.
 
Thanks to all who replied . I do not have a set for an A but found a couple of sets within my area for an "A" and was hoping they might work on the cub.
 
Kely in Tx. I apreciate the offer, do you have any idea how much the shipping would be ? or if they could be shipped Ups or not?
 
I'm sure you could break them down and ship them in several boxes, but it would cost more than they're worth! I'd estimate there's between 200 and 300lbs of steel there.

They made about 250,000 Cubs. If you're patient enough and keep your eyes open and ears to the ground you can find a set within 200 miles of you that you can drive to get.

One place you can check is farmallcub.com's classifieds.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top