86 series tractors.

DeltaRed

Well-known Member
I've been running a 1586 for the last few days.First time I ever actually ran a '86 tractor.Those things are a PIA!You have to fight the door,and you cant see anything close behind.You feel like you are sitting on top of the front wheels.But I suppose that other than that they are pretty good tractors.....
 
Cab forward designs are like that. (door excluded) The hitch view is nearly a back breaker. Even with Utility tractors and Fast Hitch and no cab, getting it pronged is a standup event over the backrest. Jim
 
I never like fueling our 1086. The 856 that came before it was easy. I could get up and sit on the hood in front of the cab. With that 1086 I felt like I could never get a good place to stand. It seemed so far up there, too.
 
Not to mention they are like riding a bucking bull with the short wheel base. Never liked them and will never own one for all the reasons that have been mentioned in the posts.
 

I like my 1586, good visibility, comfortable and quiet. Warm in the winter, cool in the summer. Yea those doors are a pain, especially when the winds blowing.
IMG_1302_zps4d3b178a.jpg

IMG_1301_zpsa9f77373.jpg

IMG_1297_zps5052d335.jpg

Winter2012032.jpg
 
My FIL has a 986 and I have always thought the door was hinged backwards. You have to shimmy up on narrow steps between the door and the dual to get in then the next obstacle is the gearshift. I don't understand why they made the lever poke up into your pathway when in the park position. As a farm equipment engineer myself I always wonder how seemingly obvious and major goof-ups can get through the entire development cycle and into production without somebody raising the flag. Cost is always a consideration but in this case it wouldn't have been any more expensive to hinge the door at the back. Or, as is sometimes the case, the engineering team gets over-ruled by the "higher ups".
 
I have an air ride seat, the K&M hydraulic cylinder and hand rail on the door.

After doing that they aren't a bad tractor. I'd rather drive it than the 4430 I own.
a142000.jpg
 
(quoted from post at 20:08:15 01/17/14) Not to mention they are like riding a bucking bull with the short wheel base. Never liked them and will never own one for all the reasons that have been mentioned in the posts.
You do realize that they are the same wheel base as a 66 series right?
 
I spent lots of hours driving an 86 series. The wheel base was the same as the 66 series, except you sat forward of the rear axle rather than on top of it as in the 66 series.
They had their issues, but I adapted. We changed our shift levers with an adapt kit that eliminated the problem. IH changed the levers in later versions. I always felt that once you were in the seat they operated quite well. In 1976, they were a vast improvement over the 66 series, but IH was already in financial trouble and proper R and D was shelved for a few more years when the 50 series was released.
 
I installed the K&M hydraulic cylinder on the door and that made quite difference---not always bumping into me before the cylinder. Might order aftermarket steps for it with a handle on the outside. Don"t know if "50" series steps will fit but don"t look as steep as the "86" series steps.
 
The 86 series is the best IH made period. You guys that say the door is backward talk like Case guys,all they know is hate IHC. David Lohf
 
(quoted from post at 10:02:14 01/18/14) The 86 series is the best IH made period. You guys that say the door is backward talk like Case guys,all they know is hate IHC. David Lohf



ALL I own is IH.........and the door IS backwards on an 86 series


:roll:
 
Dang, you got my tractor AND my planter. Now if I only had your snow blower. I agree hooking up is a challenge with the view to the back but, if you spent 12 years on a Farmall M, you would think you died and went to heaven.
 
So far haven't had to use the blower much this year. 2013 was the last year for the 800, switching to an 8 row narrow 7200 deere this spring, time will tell if that's the right choice.
 
I'm convinced I will stay with the 66 series. I always thought it would be nice to get a newer tractor going to the 86 series. My brother bought an old 1086 that needs a rear end from the clutch back. After just moving it in the yard when he got it was enough for me. I would love to find and old 10or1466 that needs an engine with a good rear end. Then I could have another tractor.
 
Our family had run Ih tractors since 1924, but when the 86 series came out we started to run Case tractors. We run 3 Magnums now, glad we never had any 86 or 88 series, saved us alot of money in repair costs.
 
...died and went to heaven... I know just what you mean. I love my 450, but driving my 1586 is restful and comfortable, and the older I get, the more important that gets!
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top