Torque's for Farmall C

BigBob706 · Jan 14, 2014

Im ready to do some work on my '49 C...I was wondering if anyone had a torque spec sheet? Im planning on taking the whole tractor apart, so torques for the whole tractor would be great!

Or is there something i can buy that tells me?

Thanks

werksguy · Jan 14, 2014

You can get a manual for your C right from this site.. The I&T manuals might not be perfect but they usually have a pretty comprehensive torque table....Look in the upper left hand corner of this page under "Tractor Manuals".

rustred · Jan 14, 2014

no such thing, there is torques for bolts of different sizes. if you can use a wrench then you know by feel when bolts are tight. the head and rods are the most critical where proper torque is required. sure you can torque the valve cover but have never seen one torqued since I did this in mechanic's class, darn near 40 years ago. you either have a natural feel or you don't.

Torque's for Farmall C

BigBob706

Member

werksguy

Member

rustred

Well-known Member

Similar threads