F-20 Rear-End Gaskets

F-Dean · Dec 29, 2013

Does anyone sell rear-end gaskets to go between the transmission and rear “Banjo” on a F-20?

I am about to switch a rear end on a F-20 and would like to avoid any oil leakage.

Ron W · Dec 29, 2013

Make them. Get a sheet of gasket material, lay it on the banjo, use a the round end of a ball peen hammer to tap and find the holes, then use the flat head to tap out the large round hole.

cole in mo. · Dec 29, 2013

Like ron said make them, I glue the paper to which ever side, let it set up, then tap it out, gluing it keeps it from moving around.

Old-F20 · Dec 29, 2013

I use black RTV. lots quicker and easier.

504 · Dec 29, 2013

Permatex gasket maker.

fixerupper · Dec 29, 2013

(quoted from post at 18:14:40 12/29/13) Does anyone sell rear-end gaskets to go between the transmission and rear “Banjo” on a F-20?

I am about to switch a rear end on a F-20 and would like to avoid any oil leakage.

t's an easy gasket to make if you have the gasket material. Rice Equipment or Fordson House should have gaskets if you don't want to make your own. I made both front and rear banjo gaskets for a Regular last winter and it does take a fair amount of gasket paper. It might be less money to buy them if you don't plan on making any more gaskets to use up the waste gasket paper you'll have left over. Jim

F-20 Rear-End Gaskets

F-Dean

Well-known Member

Ron W

Member

cole in mo.

Well-known Member

Old-F20

Member

504

Well-known Member

fixerupper

Well-known Member

Similar threads