Farmall m torque generator seal kit

Brady Miller · Dec 21, 2013

Where would I look for a char lynn 101 F torque generator seal kit?

Bob M · Dec 21, 2013

Punch the link below. Then on the page that appears punch "locate distributor" and follow the screen instructions to find the Charlynn dealer nearest you.
Eaton Charlynn

GordoSD · Dec 21, 2013

I rebuilt mine with rings from local shops. They are not all "O" rings. Larger ones are square in section.
Be sure and scribe the case before you pull it apart.BTDT

gene bender · Dec 21, 2013

Char Lynn they do have a site.remove the old one to see what you need.

notjustair · Dec 22, 2013

If you use o rings you are going to be redoing them. BTDT. I use my tractor everyday so your mileage before the hemorrhage may vary. I found a company in KC that sent me just what I needed when I told them I had a 101F. I will look at the slip out in the shed after a bit and send you the info.

The shaft seals are square in side profile. Mine had no other seals. They are machined to not need them.

GordoSD · Dec 22, 2013

Let me know the O.D. of the square rings you need. Friend owns Rubber Associates INC.

Brady Miller · Dec 22, 2013

Yes, send me their info

notjustair · Dec 22, 2013

Here is their info. The seal kit was 26.90 and I think I didn't even need everything that was in it. We have the same generator so use this number:

SK122 seal kit

Midwest Directional Services, Inc
21212 E Truman Rd
Independence MO 64056
(816)796-6400

Farmall m torque generator seal kit

Brady Miller

Member

Bob M

Well-known Member

GordoSD

Well-known Member

gene bender

Well-known Member

notjustair

Well-known Member

GordoSD

Well-known Member

Brady Miller

Member

notjustair

Well-known Member

Similar threads